To know the elastomers normally used, please refer to Table of "Chemical Resistance"   Rubber exp. joints in EPDM with drilled flanges in zinced carbon still UNI PN 10/16 Working pressure: 1.6 MPa (16 Kgf/cm2) Bursting pressure: 4.8 Mpa (48 Kg/cm2) Temperature: - 10 ° C / + 105° C Click here to acess this table in PDF   Rubber exp. joints in NBR with drilled flanges in zinced carbon still UNI PN 16 Working pressure: 1.6 MPa (16 Kgf/cm2) Bursting pressure: 4.8 Mpa (48 Kg/cm2) Temperature: - 10° C / + 100° C Click here to acess this table in PDF   Rubber expansion joint in hypalon with zinced flanges UNI PN 10 Working pressure: 1.6 MPa (16 Kgf/cm2) Bursting pressure: 4.8 Mpa (48 Kg/cm2) Temperature: - 10° C / + 100° C Click here to acess this table in PDF   Rubber expansion joints in EPDM with zinced pipe union in AISI 304 Working pressure: 1.6 MPa (16 Kgf/cm2) Bursting pressure: 3.0 Mpa (30 Kg/cm2) Temperature: - 20° C / + 100° C Click here to acess this table in PDF   Rubber expansion joints for shock absorber in EPDM with drilled flanges UNI Maximum pressure: Dal DN 20 al DN 200: 16 Bar a 20° C Drilling: PN 16 dal DN 20 al DN 150 / PN 10 per DN 200 Temperature: - 15° C / + 100° C Click here to acess this table in PDF

GIORGI SRL - Via Papa Giovanni XXIII, 51 - 20090 Rodano (Milano) - Phone +39 02 95 32 13 05 - Fax +39 02 95 32 13 18 - giorgi@giorgisrl.com © 2007 GIORGI srl - Tutti i diritti riservati - All rights reserved - Powered by Betwin.it